Democratic Underground Latest Greatest Lobby Journals Search Options Help Login
Google

Reverse-Engineering Roswell UFO Technology

Printer-friendly format Printer-friendly format
Printer-friendly format Email this thread to a friend
Printer-friendly format Bookmark this thread
This topic is archived.
Home » Discuss » The DU Lounge Donate to DU
 
norml Donating Member (1000+ posts) Send PM | Profile | Ignore Sat Jun-25-05 12:40 PM
Original message
Reverse-Engineering Roswell UFO Technology
Roswell
Lecture by Jack Shulman

--------------------------------------------------------------------------------

Reverse-Engineering Roswell UFO Technology

Source: Nexus Magazine
Volume 6, Number 4
(June-July 1999)

http://www.peg.apc.org/~nexus/

Computer company chief Jack Shulman argues that the transistor could never have been invented so suddenly at AT&T in late 1947 without the input of alien technology.

Edited from a lecture at the Global Sciences Congress in Florida, USA

March 17, 1999

(Audiotape transcribed by Ruth Parnell)

Hi, I'm Jack Shulman. I'm the head of the American Computer Company. American Computer Company is part of the Technology International Group and Bell North America group of companies. I'm also one of the owners of the group of companies. I've been in the computer industry for about 28 or 29 years. I've worked for IBM as a professional services management consultant. I worked on the development of the personal computer in 1978 for FIT and Simplicity Patterns, later adopted by IBM. I developed something called the "pattern creator". That's where we got the term "PC". Prior to that, I'd developed what you might call the first windowing operating system in 1975 for Citibank, and before that there were earlier versions I did for a company called Vydec. I'm a serious computer person - very, very serious - and also someone who's not generally inclined to leap to great predispositions about any unusual subject.


snip


I was rather shocked when, about late 1995, a dear friend came to me. He was at one time one of the very well known generals in the Pentagon, a member of the Joint Chiefs of Staff, and is now a consultant. I'd known him a very long time through the Morton family and Bell and when working for IBM. He asked me to analyse some documents that he had in his possession. He showed me some pictures. I kind of turned up my nose. I said, "I don't believe this." He suggested they were pictures of an alien craft. I said to him, "Well, why do you come to me and ask me this?" "Because there are some documents that fell into my possession that I would also like you to see, that go beyond these drawings, these pictures, these photographs, that describe some technology; and I would like you to analyse this technology and make a determination for me of the veracity of these documents, help me to authenticate them." I said, "Fine. I don't believe this is real. I'm sceptical. I don't believe in aliens, I don't believe in UFOs, I don't believe in any of that." And he said, "Okay, well, I'd still want you to take a look at them, Jack." And I agreed.


snip


We sent them to an expert who formerly consulted for Scotland Yard; he's a fairly well known forensic expert at...I believe it's the University of Edinburgh in Scotland today; he was at a different university at the time. He analysed these fragments of these documents for me, and came back and told me that the ink, the paper, even the presentations were valid; that this was in fact a book or series of books from the 1947, '48, '49, 1950 time period. That took him about four and a half weeks of analysis, and I was for four and a half weeks, as you can imagine, holding my breath. The things that I saw described in this Lab Shopkeeper's Notebook consisted of things that today would be more powerful than the Intel Pentium processor, for instance, or the Cray supercomputer. There were communications devices that were described; there were ways to sandwich-in very, very thin, micrometre-thin layers; special metals to produce moving parts for things like...from the descriptions that I read, the nearest thing I could describe...an anti-gravity propulsion unit for a spacecraft. They included dynamic electronic and power-control technology that even to this day we have not yet developed. They included communications technology that was described only as having been taken from an object of unknown or unearthly origin. The documents were very carefully worded not to reveal what was, in reality, in these boxes of materials.


snip


So now, not only did we have a picture of an alleged alien craft on our website, talking about alien technologies being transferred to AT&T, but we also were in possession of very high level, Level Five, Top Secret security clearance military faxes describing something called Sky Station.



snip



http://www.geocities.com/Area51/Shadowlands/6583/roswell023.html
Printer Friendly | Permalink |  | Top
Archae Donating Member (1000+ posts) Send PM | Profile | Ignore Sat Jun-25-05 12:49 PM
Response to Original message
1. Pure horseshit.
Yeah, us humans are SOOOO dumb, we needed the aliens or we never would have invented the transistor. :sarcasm:
Printer Friendly | Permalink |  | Top
 
norml Donating Member (1000+ posts) Send PM | Profile | Ignore Sat Jun-25-05 12:59 PM
Response to Reply #1
2. I've a new favorite word, "terahertz"
There are a lot of interesting things to be found while doing searches on advanced technology.
Printer Friendly | Permalink |  | Top
 
Redstone Donating Member (1000+ posts) Send PM | Profile | Ignore Sun Jun-26-05 06:38 PM
Response to Reply #2
15. It's "teraherz." No second 't.'
Redstone
Printer Friendly | Permalink |  | Top
 
norml Donating Member (1000+ posts) Send PM | Profile | Ignore Sun Jun-26-05 09:41 PM
Response to Reply #15
18. Web Results 1 - 10 of about 210,000 for terahertz [definition]. (0.11 sec
Web Results 1 - 10 of about 210,000 for terahertz . (0.11 seconds)

Sponsored Links

Millimeter Wave Terahertz
Mixers, Multipliers, Systems
Virginia Diodes Inc. (434) 297-3257
www.virginiadiodes.com

Terahertz Info
Free articles and information
about Terahertz
www.MyWiseOwl.com

Terahertz Spectroscopy
THz spectrometer and
THz spectrum analyzer
www.sciencetech-inc.com

Sensing with
Terahertz Radiation
By Daniel Mittleman. Only $101.71.
Amazon.com

Terrahertz Camera
Beam Profile Your THZ Laser
Ask for On-Site Demonstration
www.spiricon.com


Tip: Save time by hitting the return key instead of clicking on "search"

Home Page - Terahertz Technologies Inc.Designer and manufacture of opto-electronic instruments used with lasers and fiber optics.
www.terahertztechnologies.com/ - 12k - Cached - Similar pages


TERAHERTZ - WelcomeWelcome to Terahertz ... Physics Department of Cardiff University, develops Terahertz Instrumentation, covering range from Microwaves to the Far Infrared. ...
www.terahertz.co.uk/ - 11k - Cached - Similar pages


RPI Center for Terahertz Research - WelcomeRensselaer Polytechnic Institute Terahertz Center.
www.rpi.edu/terahertz/ - 7k - Cached - Similar pages


TeraViewTerahertz (THz=1012Hz) radiation represents the last unexplored frontier of ... The so-called “Terahertz gap” – where up until recently bright sources of ...
www.teraview.co.uk/terahertz.asp - 21k - Cached - Similar pages


Terahertz breakthrough at BESSY (March 2003) - News - PhysicsWebPhysicsWeb, The web site for physicists, PhysicsWorld, Institute of Physics, Electronic Publishing, online products and services.
physicsweb.org/article/news/7/3/9 - 19k - Cached - Similar pages


Laboratory of Terahertz SpectroscopyFile Format: PDF/Adobe Acrobat - View as HTML
Part of the Institute of Physics, Academy of Sciences of the Czech Republic. Includes information on staffing, the technologies involved and a list of ...
www.fzu.cz/departments/ dielectrics/groups/lts/LTS_en.pdf - Similar pages


Ultrafast Terahertz Research GroupOklahoma State University. Includes information on the technologies used and their research activities, publications lists, facilities and contact details.
utol.ecen.ceat.okstate.edu/ - 12k - Jun 25, 2005 - Cached - Similar pages


Terahertz SpectroscopyTerahertz data is complementary to Raman Spectroscopy. ... The new TPI™spectra 1000D adds reflective sampling to TeraHertz spectroscopy. ...
www.brukeroptics.com/terahertz/ - 12k - Cached - Similar pages


ITW2000 - International Terahertz Workshop, 17-19 September 2000Includes logistical information, conference proceedings and pictures of the meetings.
frhewww.physik.uni-freiburg.de/ ~puhd/homepage/itw2000/itw2000.html - 3k - Cached - Similar pages


Cavendish Terahertz ResearchTerahertz research home page. ... The Terahertz region of the electromagnetic spectrum, spanning the frequency range 100GHz to 10THz, has to date been ...
www.phy.cam.ac.uk/research/thz/ - 6k - Cached - Similar pages



http://www.google.com/search?hl=en&lr=&biw=780&q=terahertz&btnG=Search
Printer Friendly | Permalink |  | Top
 
norml Donating Member (1000+ posts) Send PM | Profile | Ignore Sun Jun-26-05 09:44 PM
Response to Reply #15
19. Web Results 1 - 10 of about 632 for teraherz. (0.03 seconds)
Web Results 1 - 10 of about 632 for teraherz. (0.03 seconds)

Sponsored Links

Terahertz Spectroscopy
THz spectrometer and
THz spectrum analyzer
www.sciencetech-inc.com


Did you mean: terahertz


Fourwinds10.com - News - Science/Technology > Computers -- The ...Research Group At Comp America Announces Breakthrough: The Production Of A 50 Teraherz "TINY Programmable Calculator". Small Research Prototype Outperforms ...
www.fourwinds10.com/.../B-computers/ 2003/12B-12-25-02-breakthrough-technology-calculator.html - 15k - Cached - Similar pages


Fourwinds10.com - News - Science/Technology > Computers ...operating at speeds up to 12 TeraHerz with very low voltage requirements and almost no heat ... (12 TeraHerz = 12000000000000 Herz) scale 1:1. FEATURES: ...
www.fourwinds10.com/news/12-science-tech/B-computers/ 2003/12B-12-25-02-transfer-capacitor-storage-device.html - 17k - Cached - Similar pages


Interband Bloch–Siegert shift in p-type GaAs and InP at teraherz ...File Format: PDF/Adobe Acrobat
teraherz frequencies. A Dargys. Semiconductor Physics Institute, A. Gostauto 11, ... and in the teraherz frequency range and at intensities about 1 MW cm ...
www.iop.org/EJ/article/0953-8984/12/5/103/c005l3.pdf - Similar pages


BogomolovSOME PHYSICAL ASPECTS OF THE TERAHERZ RANGE APPLICATIONS ... Recently, the teraherz range is in the fast progress and many efforts are making for research ...
fy.chalmers.se/~f4agro/BJ2004/Bogomolov/ - 5k - Cached - Similar pages


Ultrafast Electronics and Photonics ClubMay 98 - Teraherz Technology NPL. The Ultrafast Electronics and Photonics club meeting, held at NPL on 13th May, attracted over 20 participants from both ...
www.npl.co.uk/electromagnetic/ ufe-opto/tech-transfer/clubs/uepc-mt12.html - 12k - Cached - Similar pages


The DanceDo you dare to let the moments pass? Erich K. Brown. Avda Ecos del Rocio #6. 11520 Rota, Cádiz. España. ekbrown@teraherz.com. Copyright 2004, Nispernet SL.
teraherz.com/ - 6k - Cached - Similar pages


CGStudio - ПОРТФОЛИО - 2002 - TERAHERZCGStudio - это разработка сайтов логотипов бланков фирм организаций компаний, а также различные другие рекламные решения.
cgstudio.ru/portfolio/2002/teraherz/ - 13k - Cached - Similar pages


Simple Technicalendar Record DisplayHEILWEIL, E. : TERAHERZ SPECTROSCOPY AND IMAGING APPLICATIONS. Brookhaven National Laboratories, Brookhaven New York, USA, 5/10/05.
ois.nist.gov/techcal/search/ display.cfm?uniqueID=104118Edwin0.81430317 - 2k - Cached - Similar pages


An Explosive Topic - Gateway To Russia - News From RussiaThis device uses the Teraherz range that replaces x-rays. Replacing x-rays with a harmless Teraherz options could revolutionize both medicine and security. ...
www.gateway2russia.com/st/art_252797.php - 21k - Cached - Similar pages


Materials World NewsFirst for teraherz magnetism An artificial metamaterial that can provide a strong, ... The magnetic metamaterial could allow the development of teraherz ...
www.iom3.org/materialsworld/april04/news2.htm - 39k - Cached - Similar pages


Did you mean to search for: terahertz



http://www.google.com/search?biw=780&hl=en&q=teraherz&btnG=Google+Search
Printer Friendly | Permalink |  | Top
 
norml Donating Member (1000+ posts) Send PM | Profile | Ignore Sun Jun-26-05 10:04 PM
Response to Reply #15
22. Heinrich Rudolph Hertz (1857 - 1894)
Heinrich Rudolph Hertz (1857 - 1894)

Heinrich Rudolf Hertz was born in Hamburg, Germany. His father was a prominent lawyer and legislator. In his youth Heinrich enjoyed building instruments in the family workshop. Hertz began his college studies at the University of Munich. After a short time he transferred to the University of Berlin, where he received his Doctor of Philosophy degree magna cum laude. In Berlin he was an assistant to Hermann von Guericke, Hall, Helmholtz, Héroult, one of the foremost physicists of the time. In 1883 Hertz became a lecturer in theoretical physics at the University of Kiel. Two years later he was appointed professor of physics at Karlsruhe Polytechnic. In the 1880s physicists were trying to obtain experimental evidence of electromagnetic waves. Their existence had been predicted in 1873 by the mathematical equations of James Clerk Maxwell, a British scientist.


(portrait courtesy)

In 1887 Hertz tested Maxwell's hypothesis. He used an oscillator made of polished brass knobs, each connected to an induction coil and separated by a tiny gap over which sparks could leap. Hertz reasoned that, if Maxwell's predictions were correct, electromagnetic waves would be transmitted during each series of sparks.

To confirm this, Hertz made a simple receiver of looped wire. At the ends of the loop were small knobs separated by a tiny gap. The receiver was placed several yards from the oscillator. According to theory, if electromagnetic waves were spreading from the oscillator sparks, they would induce a current in the loop that would send sparks across the gap. This occurred when Hertz turned on the oscillator, producing the first transmission and reception of electromagnetic waves. Hertz also noted that electrical conductors reflect the waves and that they can be focused by concave reflectors. He found that nonconductors allow most of the waves to pass through. Another of his discoveries was the photoelectric effect. In 1889 Hertz was appointed professor of physics at the University of Bonn. (reference)

Hertz opened the way for the development of radio, television, and radar with his discovery of electromagnetic waves between 1886 and 1888. James Clerk Maxwell had predicted such waves in 1864. Hertz used a rapidly oscillating electric spark to produce waves of ultrahigh frequency. He showed that these waves caused similar electrical oscillations in a distant wire loop. He also showed that light waves and electromagnetic waves were identical (see Electromagnetism). Hertz was born in Hamburg.



snip



http://www.corrosion-doctors.org/Biographies/HertzBio.htm
Printer Friendly | Permalink |  | Top
 
Redstone Donating Member (1000+ posts) Send PM | Profile | Ignore Sun Jun-26-05 10:12 PM
Response to Reply #22
23. Stone me, I've lost my fucking mind!
I was in the high-frequency electronics business for 20 years, and dealt with MHz and GHz every day. And now I've forgotten how the guy's name is spelled!

Thanks for the correction.

Redstone
Printer Friendly | Permalink |  | Top
 
Southsideirish Donating Member (1000+ posts) Send PM | Profile | Ignore Sat Jun-25-05 01:39 PM
Response to Reply #1
5. Thanks for that thoughtful "opinion."
You added a lot to the conversation.
Printer Friendly | Permalink |  | Top
 
RandomKoolzip Donating Member (1000+ posts) Send PM | Profile | Ignore Sat Jun-25-05 01:44 PM
Response to Reply #5
7. Anytime anyone steers any conversation away from
wacky UFO crap and into saner waters, he/she HAS made a valuable contribution, IMO.
Printer Friendly | Permalink |  | Top
 
norml Donating Member (1000+ posts) Send PM | Profile | Ignore Sat Jun-25-05 02:02 PM
Response to Reply #7
8. Secret communications with Extraterrestrial UFOs in the infrared range at
Secret communications with Extraterrestrial UFOs in the infrared range at above 190 Terahertz
Staff Reporter
Apr. 22, 2005


Many countries are in contact with Extraterrestrial UFOs on a regular basis facilitating their activities and trying to reverse engineer their technologies secretly. This is the belief of many UFO researchers. However, all the countries deny any such thing as ongoing secret communication with the extraterrestrials.

But analysis of flight patterns of many Air Forces as documented in various public sources reveal an interesting pattern. Somehow major Air Forces in the world avoid certain part of their territories at certain times. Computer models show interesting correlation between UFO sightings and avoidance of flights by the Air Forces in that region of the world. What that really means is that Governments know where UFOs will operate their flight activities and these days cooperating Governments avoid flying into those regions. Interestingly commercial aircrafts fly in specific routes controlled by the countries.

The big question then is how are these UFOs contacting the Governments?

Some scientists and engineers believe the communications are taking place secretly at very special short-wavelength, high-frequency signals that occupy the electromagnetic spectrum above 190 THz in the infrared range. It is the optical wireless range that requires special devices and is normally out of reach of the public though in some countries no licensing is required.



snip



http://www.indiadaily.com/editorial/2399.asp
Printer Friendly | Permalink |  | Top
 
Redstone Donating Member (1000+ posts) Send PM | Profile | Ignore Sun Jun-26-05 08:41 PM
Response to Reply #5
17. What conversation?
Posting dipwhack theories isn't conversation.

Redstone
Printer Friendly | Permalink |  | Top
 
Lilyhoney Donating Member (1000+ posts) Send PM | Profile | Ignore Mon Jun-27-05 01:54 AM
Response to Reply #5
26. Not on topic here but
I was wondering south side of where?
Printer Friendly | Permalink |  | Top
 
norml Donating Member (1000+ posts) Send PM | Profile | Ignore Mon Jun-27-05 02:17 AM
Response to Reply #5
27. This seems to be one of my less popular threads.
I enjoy speculating about such subjects. The Meeting Room looks like it's closing soon, so I thought I'd stick it in The Lounge. At least no one is saying they've always hated my threads, like they did when I posted something about Clark and Fox News. Thanks for the help.
Printer Friendly | Permalink |  | Top
 
Commie Pinko Dirtbag Donating Member (1000+ posts) Send PM | Profile | Ignore Mon Jun-27-05 12:36 PM
Response to Reply #27
32. Absence of feces, Mr. Holmes. (nt)
Printer Friendly | Permalink |  | Top
 
Commie Pinko Dirtbag Donating Member (1000+ posts) Send PM | Profile | Ignore Sat Jun-25-05 01:41 PM
Response to Reply #1
6. Because, you know, we HADN'T quantum mechanics in 1947
Bohr, Einsten, Hisemberg, Schrödinger etc. were just figments of our imaginations. Or aliens. Maybe both. :crazy:
Printer Friendly | Permalink |  | Top
 
norml Donating Member (1000+ posts) Send PM | Profile | Ignore Sun Jun-26-05 05:19 PM
Response to Reply #6
9. REVERSE-ENGINEERING ROSWELL UFO TECHNOLOGY: Part 2
Edited on Sun Jun-26-05 05:22 PM by norml
REVERSE-ENGINEERING ROSWELL UFO TECHNOLOGY

HOW COULD AT&T HAVE CREATED THE TRANSISTOR SO QUICKLY
IN 1947 WITHOUT THE INPUT OF ALIEN TECHNOLOGY? (page2)


snip
So, right now, that's about where we're up to. We're starting to commercialise the transfer capacitor and look at partners; we're going to get it out there. We figured, why not? We've spent so much money on the research investigation, we might as well see if we can sell these things to people.

British Telecom has jumped in and stated they've placed a letter-of-intent order with us. They're using it in a product they call the "Soul Catcher" chip. We've had some preliminary discussions with a company called Shipley, the world's largest manufacturer of semiconductor materials.

We've had discussions with Intel, IBM. Just in the last few months, a guy from IBM said, "You should have been dealing with us all along." "Well, why didn't you come to us?" "Well, I'm coming to you now." "There are a lot of people who are interested." "Well, we're IBM." "So? You had these in your lab all along and couldn't get them to work!"

We're not sure what direction it's all going to go in, but I just wanted to end with this. This morning, as I was going up in the elevator, I felt like I was hanging upside down, holding the world up with my feet. The next time you get in the elevator out there, think about that. That's how we feel at ACC.




This post is part of the main AboveTopSecret.com content archive. It has been moved from the static archive and integrated with the discussion board to allow our members to comment on the material.

The content can be seen here on ATS: abovetopsecret.com/pages/acc2.html


snip


http://www.abovetopsecret.com/forum/thread59682/pg1
Printer Friendly | Permalink |  | Top
 
chickenscratching Donating Member (1000+ posts) Send PM | Profile | Ignore Mon Jun-27-05 12:34 PM
Response to Reply #1
31. Why are humans dumb?
:shrug:
Printer Friendly | Permalink |  | Top
 
undeterred Donating Member (1000+ posts) Send PM | Profile | Ignore Sat Jun-25-05 12:59 PM
Response to Original message
3. Jack Kilby, Inventor of the Microchip in 1958, died this week
Printer Friendly | Permalink |  | Top
 
RandomKoolzip Donating Member (1000+ posts) Send PM | Profile | Ignore Sat Jun-25-05 01:36 PM
Response to Original message
4. Google the name "Bob Lazar."
Dude's almost as nutty as Tom Cruise. ALMOST.
Printer Friendly | Permalink |  | Top
 
norml Donating Member (1000+ posts) Send PM | Profile | Ignore Mon Jun-27-05 11:07 PM
Response to Reply #4
33. The History Channel has something about Philip Corso on now.
Philip Corso
Are we using Alien Technology today?
Have we, the human race back-engineered alien technology as a ways of ensuring that we would, at least, have a fighting chance if we were invaded by alien beings? That was the belief of Major Philip J. Corso who stumbled upon alien artifacts sent from Fort Bliss, Texas on 6th July, 1947. He had come across a Corporal off limits in a warehouse and was just about to reprimand him, when the Corporal said 'You won't believe this'. 'What are you talking about?' asked the Major, taking a look inside the open crate. There was no need for the Corporal to answer. The crate, one of several, contained the body of a being, the like of which Corso had never seen before.

'At first I thought it was a dead child they were shipping somewhere' Corso later claimed.
'It was a four-foot, human-shaped creature with...bizarre-looking, four fingered hands...and a light-bulb shaped head. The eye sockets were oversized and almond-shaped and pointed down to its tiny nose, which didn't really protrude from its skull'.

Corso looked through the paperwork that accompanied the crate, and found an army intelligence document that described the creature as an inhabitant of a craft that had been retrieved from Roswell, New Mexico, two days earlier on 4th July, 1947. As he shone his torch around the warehouse, he noticed that there were over 30 similar crates stacked against the walls. Major Corso quickly covered the crate with a tarpaulin, and moved outside. He turned to the Corporal and said 'You never saw this and you tell no one'. As far as Corso was concerned, that was the last he ever wanted to see or hear of the crates and their strange contents. But fate would see that their paths would cross again.

By 1961, Philip J. Corso had risen to the rank of Lieutenant Colonel in charge of the Foreign Technology desk in the US Army's Research and Development division at the Pentagon. It was his job to evaluate weapons systems and 'investigate' foreign technology. This included taking apart Soviet MiG fighter planes to find out why they were better than the US equivalent.



snip



http://www.ufos-aliens.co.uk/cosmiccorso.html
Printer Friendly | Permalink |  | Top
 
baldguy Donating Member (1000+ posts) Send PM | Profile | Ignore Sun Jun-26-05 05:22 PM
Response to Original message
10. How come none of your links work?
Missing a little "alien technology" maybe?
Printer Friendly | Permalink |  | Top
 
norml Donating Member (1000+ posts) Send PM | Profile | Ignore Sun Jun-26-05 05:28 PM
Response to Reply #10
11. Could be they've gone into the X-Files.
Sorry I didn't check them before I posted them.
Printer Friendly | Permalink |  | Top
 
obxhead Donating Member (1000+ posts) Send PM | Profile | Ignore Sun Jun-26-05 05:35 PM
Response to Original message
12. hey norml
Printer Friendly | Permalink |  | Top
 
norml Donating Member (1000+ posts) Send PM | Profile | Ignore Sun Jun-26-05 09:58 PM
Response to Reply #12
21. Some interesting links come up searching with terahertz and haarp together
Web Results 1 - 10 of about 135 for haarp terahertz. (0.34 seconds)
Tip: Save time by hitting the return key instead of clicking on "search"

UNCLASSIFIED UNCLASSIFIED
File Format: PDF/Adobe Acrobat - View as HTML
Auroral Research Program (HAARP) to identify or improve Command, Control,
Communications, ... first step in 3 terahertz (THz) digital device process. ...
www.dtic.mil/descriptivesum/Y2005/Navy/0601153N.pdf - Similar pages

Steve Quayle News Alerts: Techno-Decadence -- Mark of the Beast
Chemtrails, HAARP, and Mass Mind Control Advanced Weapon Systems Using Lethal
Short-Pulse Terahertz Radiation From High-Intensity-Laser-Produced Plasmas ...
www.stevequayle.com/News.alert/ 05_Tech/05_Tech.index1.html - 18k - Cached - Similar pages

Extremely low frequency
Quick Summary not found for this subjectTerahertz radiation Quick Facts about:
Ka band Quick Summary not found for this subjectKa band ...
www.absoluteastronomy.com/encyclopedia/ E/Ex/Extremely_low_frequency.htm - 23k - Cached - Similar pages

News letter
File Format: PDF/Adobe Acrobat - View as HTML
Heater-Induced Airglow at HAARP”, $100000. Kintner, Paul – NASA (Wash. ...
Schaff, William – DOD (NAVY-ONR), “Terahertz Emission from II- ...
www.ece.cornell.edu/newsletters/Nov.04News.pdf - Similar pages

Sessions
11:00-11:15, (10300) ON THE CASCADE SPECTRUM OF LANGMUIR WAVES IN HAARP HEATING
... 11:15-11:30, (10623) MINIATURE PLASMA CATHODE FOR HIGH-POWER TERAHERTZ ...
www.icops2005.org/Sessions.htm - 101k - Jun 25, 2005 - Cached - Similar pages

Mind Control Forum - Archives
John Quinn The USAF Montauk Project, HAARP's Covert Agendas ... Taming the
Terahertz T-rays could be more versatile than x-rays. By Herb Brody ...
www.mindcontrolforums.com/archv-hm.htm - 89k - Cached - Similar pages

Return of the Nephilim - Past Prophecy in the News for 03-14-2005 ...
... Lethal Short-Pulse Terahertz Radiation From High-Intensity-Laser-Produced
Plasmas. ... Worthy of Attention: Chemtrails, HAARP, and Mass Mind Control ...
www.returnofthenephilim.com/ archive/ProphecyInTheNews03-14-05.html - 46k - Cached - Similar pages

Welcome to Bo's Tech Page
Image: HAARP prototype array This high-frequency transmitter and array of antennae in
... Hello, Terahertz We all know chips are getting faster and faster. ...
www.uninets.net/~blaisdel/tech.htm - 33k - Cached - Similar pages

Einsatz von Radartechnik und Mikrowellenstrahlung zur ... -
HAARP ist offiziell eine arktische Einrichtung zur Erforschung der oberen ...
dass Personenkontrolle auch durch Mauern! mit Terahertz-Wellen möglich ist c't ...
www.politikforum.de/forum/archive/6/2002/08/2/19521 - 47k - Cached - Similar pages

Omega-News: Weapons
4G (if it is of the terahertz variety circulated a few days ago) is a whole new
ballgame, with global military communications and weapons linkage, ...
omega.twoday.net/topics/Weapons/ - 36k - Cached - Similar pages


http://www.google.com/search?biw=780&hl=en&q=haarp+terahertz&btnG=Google+Search
Printer Friendly | Permalink |  | Top
 
leftofthedial Donating Member (1000+ posts) Send PM | Profile | Ignore Sun Jun-26-05 05:54 PM
Response to Original message
13. I'm from Roswell
and we never could have raised so many ignorant rednecks without the influx of alien technology.

so, I guess it's plausible.
Printer Friendly | Permalink |  | Top
 
Redstone Donating Member (1000+ posts) Send PM | Profile | Ignore Sun Jun-26-05 06:37 PM
Response to Original message
14. Yeah, sure.
Does DU need a "Nitwit Theories" group?

It may be time for one.

Redstone
Printer Friendly | Permalink |  | Top
 
LongTomH Donating Member (1000+ posts) Send PM | Profile | Ignore Sun Jun-26-05 07:19 PM
Response to Original message
16. If aliens are so smart, why do they always abduct...........
the dumbest people? And how have they missed GWB?
Printer Friendly | Permalink |  | Top
 
Floogeldy Donating Member (1000+ posts) Send PM | Profile | Ignore Sun Jun-26-05 09:46 PM
Response to Original message
20. Perhaps a little history on the development of the transistor could help.
Or did it just kind of come out of nowhere, all of the sudden?

B-)
Printer Friendly | Permalink |  | Top
 
chickenscratching Donating Member (1000+ posts) Send PM | Profile | Ignore Mon Jun-27-05 12:20 PM
Response to Reply #20
28. "Transister"
It helps to do a little research on "transister" first.
Happy hunting!
:hi:

Transistor
From Wikipedia, the free encyclopedia.
(Redirected from Transister)
Through hole transistors (tape measure marked in centimeters)
Enlarge
Through hole transistors (tape measure marked in centimeters)

The transistor is a solid state semiconductor device which can be used for amplification, switching, voltage stabilization, signal modulation and many other functions. It acts as a variable valve which, based on its input current (BJT) or input voltage (FET), allows a precise amount of current to flow through it from the circuit's voltage supply.

In essence, a transistor has three terminals. A current or voltage applied through/across two terminals controls a larger current through the other terminal and the common terminal. In analog circuits, transistors are used in amplifiers. Analog circuits include audio amplifiers, stabilised power supplies and radio frequency amplifiers. In digital circuits, transistors function essentially as electrical switches. Digital circuits include logic gates, RAM (random access memory) and microprocessors.

Transistor was also the common name in the sixties for a transistor radio, a portable radio that used transistors (rather than vacuum tubes) as its active electronic components. This is still one of the dictionary definitions of transistor.
Contents
1 Invention
2 Origin of name
3 Importance
4 Types

4.1 FET Families
4.2 Other types
4.3 Semiconductor material
4.4 Packaging
4.5 Gallery
5 Advantages of transistors over vacuum tubes
6 Use in audio amplifiers

6.1 HiFi amplifiers
6.2 Guitar amplifiers
7 Use in computers
8 How transistors work
9 How semiconductors work
10 Electrical characteristics
11 Light sensitivity
12 History

12.1 1900s
12.2 World War II
12.3 Development
12.4 First transistor
12.5 Problems with fragility and impurities
12.6 Early consumer and hobbyist applications
12.7 Miniaturization
13 See also
14 External links and references


Invention

The transistor was invented at Bell Telephone Laboratories in December 1947 (first demonstrated on December 23) by John Bardeen, Walter Houser Brattain, and William Bradford Shockley, who were awarded the Nobel Prize in physics in 1956. Ironically, they had set out to manufacture a field-effect transistor (FET) predicted by Julius Edgar Lilienfeld as early as 1925 but eventually discovered current amplification in the point-contact transistor that subsequently evolved to become the bipolar junction transistor (BJT).


Origin of name

Bell Telephone Laboratories needed a generic name for their new invention: "Semiconductor Triode", "Solid Triode", "Surface States Triode" , "Crystal Triode" and "Iotatron" were all considered, but "transistor", coined by John R. Pierce, won an internal ballot. The rationale for the name is described in the following extract from the company's Technical Memoranda (May 28, 1948) <1> () calling for votes:

"Transistor. This is an abbreviated combination of the words "transconductance" or "transfer", and "varistor". The device logically belongs in the varistor family, and has the transconductance or transfer impedance of a device having gain, so that this combination is descriptive."


Importance

The transistor, considered by many to be one of the greatest inventions in modern history, ranks with the printing press and the telephone. It is the key active component in practically all modern electronics. Its importance in today's society rests on its ability to be mass produced using a highly automated process (fabrication) that achieves vanishingly low per-transistor costs.

Although millions of individual (discrete) transistors are still used, the vast majority are fabricated in chips along with diodes, resistors, capacitors and inductors to produce complete electronic functions, either analog or digital. Often both types of function are integrated on the same chip. The cost of designing and developing a complex chip is astronomical, but when spread across millions of production units the individual chip cost is minimized. A logic gate comprises about 20 transistors whereas an advanced processor, as of early 2005, can use as many as 289 million transistors.

The word "chip" is now used rather loosely: originally it referred to the actual piece of semiconductor before packaging. Once the chip had been packaged it was called an "integrated circuit", or just "IC", and sometimes a "bug". Chip, integrated circuit and IC are now used interchangeably while bug has gone out of fashion. The term "solid state" is used to describe a device which does not control charge flow through a vacuum (vacuum tube) or a gas and which does not use moving parts (relay) to control charge flow. In the same vein, a circuit or item of equipment may be described as "solid state".

The transistor's low cost, flexibility and reliability have made it an almost universal device for non-mechanical tasks. Whereas a common item, say a refrigerator, would have used electromechanical devices for control, today it is often less expensive and more effective to simply use a standard integrated circuit (containing a few million transistors) and write a computer program to carry out the same task through logic. Transistors have replaced almost all electromechanical devices, are used in most simple feedback control systems, and appear in huge numbers in everything from traffic lights to washing machines.

Hand-in-hand with low cost has come the trend to digitize information. With transistor-utilizing computers offering the ability to quickly find, sort and process digital information, more and more effort has been put into making information digital. Almost all media today is delivered in digital form, finally being converted and presented in analog form by computers. Familiar areas influenced by the drive to digitize are television, radio and newspapers.


Types
Image:BJT_symbol_PNP.png PNP Image:JFET_symbol_P.png P-channel
Image:BJT_symbol_NPN.png NPN Image:JFET_symbol_N.png N-channel
BJT JFET
Transistor symbols of different types

Broadly speaking, transistors are categorised as follows:

* Semiconductor material: germanium, silicon, gallium arsenide
* Physical packaging: through hole metal, through hole plastic, surface mount, ball grid array
* Type: BJT, JFET, IGFET (MOSFET), "other types"
* Polarity: NPN/ N channel, PNP/ P channel
* Maximum power rating: low, medium, high
* Maximum frequency capability: low, medium, high, radio frequency (RF), microwave
* Application: amplifier, switch, general purpose, audio, high voltage

Thus, a particular transistor may be described as: silicon, surface mount, BJT, NPN, low power, high frequency switch.


FET Families

FETs are divided into two families: junction FET (JFET) and insulated gate FET (IGFET) also known as metal oxide silicon (or semiconductor) FET (MOSFET). Unlike IGFETs, the JFET gate terminal forms a diode with the channel (semiconductor material between source and drain). Functionally, this makes the N channel JFET the solid state equivalent of the vacuum tube triode which, similarly, forms a diode between its grid and cathode. Also, both devices operate in the "depletion mode", they both have a high input impedance, and they both conduct current under the control of an input voltage.

FETs are further divided into enhancement mode and depletion mode types. Mode refers to the polarity of the gate voltage with respect to the source when the device is conducting. Taking N channel FETs: in depletion mode the gate is negative with respect to the source while in enhancement mode the gate is positive. For both modes, if the gate voltage is made more positive the source/drain current will increase. For P channel devices the polarities are reversed. Most IGFETs are enhancement mode types and nearly all JFETS are depletion mode types.


Other types

* Unijunction transistors can be used as simple pulse generators. They comprise a main body of either P or N type semiconductor with ohmic contacts at each end (terminals B1 and B2). A junction with the opposite semiconductor type is formed at a point along the length of the body for the third terminal (E).
* Dual gate FETs have a single channel with two gates in cascode; a configuration that is optimised for high frequency amplifiers, mixers, and oscillators.
* Transistor arrays are used for general purpose applications, function generation and low-level, low-noise amplifiers. They include two or more transistors on a common substrate to ensure close parameter matching and thermal tracking, characteristics that are especially important for long tailed pair amplifiers.
* Darlington transistors comprise a medium power BJT connected to a power BJT. This provides a high current gain equal to the product of the current gains of the two transistors. Power diodes are often connected between certain terminals depending on specific use.
* Insulated gate bipolar transistors (IGBTs) use a medium power IGFET, similarly connected to a power BJT, to give a high input impedance. Power diodes are often connected between certain terminals depending on specific use. IGBTs are particularly suitable for heavy-duty industrial applications. The Asea Brown Boveri (ABB) 5SNA2400E170100 <2> (http://library.abb.com/GLOBAL/SCOT/scot256.nsf/VerityDisplay/71B8625C035676C2C1256F9000471D3C/$File/5SNA%202400E170100_5SYA%201555-02Aug%2004.pdf) illustrates just how far power semiconductor technology has advanced. Intended for three-phase power supplies, this awesome device houses three NPN IGBTs in a case measuring 38 by 140 by 190 mm. Each IGBT is rated at 1,700 volts and can handle 2,400 amperes.



Semiconductor material

Initially, BJTs were made from germanium (Ge) and some high power types still are. Silicon (Si) types currently predominate but certain advanced microwave and high performance versions now employ the compound semiconductor material gallium arsenide (GaAs). Single element semiconductor material (Ge and Si) is described as elemental. The characteristics for the most common semiconductor materials used to make transistors are given in the table below:
Semiconductor material characteristics Semiconductor
material Junction forward
voltage
V @ 25 °C Electron mobility
m/s @ 25 °C Hole mobility
m/s @ 25 °C Max junction temp.
°C
Ge 0.27 0.39 0.19 70 to 100
Si 0.71 0.14 0.05 150 to 200
GaAs 1.03 0.85 0.05 150 to 200
Al/Si junction 0.3 - - 150 to 200


The Junction forward voltage is the voltage necessary to make the emitter/base junction of a BJT conduct a specified current. The values given in the table are typical for a current of 1 mA (the same values apply to semiconductor diodes). The lower the junction forward voltage the better, as this means that less power is required to "drive" the transistor. For normal doping levels the junction forward voltage is typically 0.4 V less than the band gap. Band gap is the voltage difference between the valence energy band and the conduction energy band for a given material. The junction forward voltage for a given current decreases with temperature. For a typical silicon junction the change is around - 2 mV/°C.

Electron mobility and Hole mobility columns show the average speed that electrons and holes defuse through the semiconductor material with 1 volt per meter applied across the material. In general, the higher the electron mobility the faster the transistor. The table indicates that Ge is a better material than Si in this respect, and so it is. But, Ge has four major shortcomings compared to silicon and gallium arsenide: its maximum temperature is limited, it has relatively high leakage current, it can not withstand such high voltages and it is less suitable for fabricating chips. As the electron mobility is higher than the hole mobility for all semiconductor materials, a given NPN BJT tends to be faster than an equivalent PNP BJT type. GaAs has the fastest electron mobility of the three semiconductors. It is for this reason that GaAs is used in high frequency applications. A relatively recent FET development, the high electron mobility transistor (HEMT), has a hetro-structure (junction between different semiconductor materials) of aluminium gallium arsenide (AlGaAs)/gallium arsenide (GaAs) which has double the electron mobility of a GaAs/metal barrier junction. Because of their high speed and low noise, HEMTs are used in satellite receivers working at a frequency around 12 GHz.

Max junction temperature values represent a cross section taken from various manufacturer's data sheets. This temperature should not be exceeded or the transistor may be destroyed.

Al/Si junction refers to the aluminium/silicon high-speed semiconductor/metal barrier diode, commonly known as a schottky diode. This is included in the table because most silicon power IGFETs have a parasitic reverse schottky diode formed between the source and drain as part of the fabrication process.


Packaging
Surface Mount Transistor (typical dimensions L 3.0, W 2.6, H 1.1mm including contacts)
Enlarge
Surface Mount Transistor (typical dimensions L 3.0, W 2.6, H 1.1mm including contacts)

Transistors come in many different packages (see images), both through hole (or leaded) and surface mount, also known as surface mount device (SMD). Often you have a choice of package for a given transistor chip. The ball grid array (BGA) is the leading-edge surface mount package (currently only for large transistor arrays and digital functions). It has solder 'balls' on the underside which are fused to pads on the host printed circuit board (PCB) by heating the whole board, normally by infrared radiation. Being hidden, the joint is then checked for quality by x-ray imaging. Because they are smaller and have shorter interconnections, SMDs have better frequency characteristics but lower power rating. Transistor packages are normally made of glass, metal, ceramic or plastic. For enhanced cooling, power transistors have large packages that can be clamped to heat sinks, but at the other extreme some surface-mount microwave transistors resemble specks of dust. Also to aid cooling, most power types have the collector/drain internally connected to the metal can/metal plate (in "non-conductive" power packages the non-conductive package material is moulded on to a metal plate for heatsink interfacing).


Gallery

A bewildering range of transistors is already available and manufacturers continually introduce improved types. A few examples from the main families are featured below. Unless otherwise stated, all types are made from silicon semiconductor. Complementary pairs are shown as NPN/PNP or N/P channel. Just left click on the link<3> (http://www.onsemi.com/pub/Collateral/2N3903-D.PDF) to access the data sheet (on some data sheets the stated transistor category can be misleading) :

* 2N3904<4> (http://www.onsemi.com/pub/Collateral/2N3903-D.PDF)/2N3906<5> (http://www.onsemi.com/pub/Collateral/2N3906-D.PDF), BC182<6> (http://www.onsemi.com/pub/Collateral/BC182-D.PDF)/BC212<7> (http://www.onsemi.com/pub/Collateral/BC212-D.PDF) and BC546<8> (http://www.onsemi.com/pub/Collateral/BC546-D.PDF)/BC556<9> (http://www.onsemi.com/pub/Collateral/BC556B-D.PDF). BJT, general-purpose, low-power, complementary pairs. They have plastic cases and cost a few cents U.S, making them popular with hobbyists.

* BFP183<10> (http://www.infineon.com/cmc_upload/documents/009/024/bfp183_1.pdf) Low power, 8 GHz microwave NPN BJT. High-frequency design techniques are mandatory if you want to make amplifiers, mixers and oscillators with Infineon's lightning-fast BJT. It costs around $1.0 U.S. WARNING: this device may contain beryllium oxide which is highly toxic: NEVER cut open or incinerate.

* LM394<11> (http://www.national.com/ds/LM/LM194.pdf) 'supermatch pair' Two individual low power, low noise, NPN BJTs on a single substrate.

* 2N2219A<12> (http://www.st.com/stonline/books/pdf/docs/9288.pdf)/2N2905A<13> (http://www.st.com/stonline/books/pdf/docs/9037.pdf) BJT, general purpose, medium power, complementary pair. With metal cases they are rated at about one watt.

* 2N3055<14> (http://www.onsemi.com/pub/Collateral/2N3055-D.PDF)/MJ2955<15> (http://www.onsemi.com/pub/Collateral/2N3055-D.PDF) For years, the venerable NPN 2N3055 has been the standard power work-horse. Its complement, the PNP MJ2955 arrived later. These rugged, 1 MHz, 15 A, 60 V, 115 W BJTs are suitable for audio power amplifiers, power supplies and control. With metal or plastic cases they retail for about $1.00 U.S.

* 2SC3281/2SA1302 Optimised for the output stages of HiFi amplifiers up to 100 watts, Toshiba's low-distortion fully complementary, plastic case BJTs are revered by audiophile designers who are wary of botched counterfeits<16> (http://sound.westhost.com/counterfeit.htm).

* BU508<17> (http://www.st.com/stonline/books/pdf/docs/4491.pdf) NPN, 1,500 V, power BJT. Designed for television (TV) horizontal deflection, its high voltage capability also makes it useful for ignition systems.

* MJ11012<18> (http://www.onsemi.com/pub/Collateral/MJ11012-D.PDF)/MJ11015<19> (http://www.onsemi.com/pub/Collateral/MJ11012-D.PDF) 30 A, 120 V, 200 W, high power darlington complementary pair BJTs for audio amplifiers, control and power switching (high current reverse diode between emitter and collector).

* 2N5457<20> (http://www.fairchildsemi.com/ds/2N%2F2N5457.pdf)/2N5460<21> (http://www.fairchildsemi.com/ds/2N%2F2N5460.pdf) JFET (depletion mode), general purpose, low power, complementary pair.

* BSP296<22> (http://www.infineon.com/cmc_upload/documents/010/3483/BSP296_021210_Rev1.0.pdf)/BSP171<23> (http://www.infineon.com/cmc_upload/documents/098/602/BSP171P_Rev2.0.pdf) IGFET (enhancement mode), medium power, near complementary pair (medium current reverse schottkey diode between source/drain). Infineon's ultra sensitive gate IGFETs are ideal for converting logic levels to higher voltages. They are also suitable for driving power transistors in amplifiers.

* IRF3710<24> (http://www.irf.com/product-info/datasheets/data/irf3710.pdf)/IRF5210<25> (http://www.irf.com/product-info/datasheets/data/irf5210.pdf) IGFET (enhancement mode), high power, near complementary pair (hign current reverse schottkey diode between source/drain). With remarkably low on-resistances of 23/60 milliohms and sensitive gates (10 V to fully turn on), International Rectifier's 40 A, 100 V, 200 W "heavy lifters" make efficient amplifiers and power switches, especially for automobiles.



Advantages of transistors over vacuum tubes

Before the development of transistors vacuum tubes (or in the UK thermionic valves or just valves) were the main active components in electronic equipment. The key advantages that have allowed transistors to replace their vacuum tube predecessors in most applications are:

* Smaller size (despite continuing miniaturization of vacuum tubes)
* Highly automated manufacture
* Lower cost (in volume production)
* Lower possible operating voltages
* Operate "immediately" (most vacuum tubes need 10 to 60 seconds to "warm up")
* Lower power dissipation (no heater power, very low saturation voltage)
* Higher reliability and greater endurance (but vacuum tubes are more resistant to nuclear electromagnetic pulses (NEMP) and electrostatic discharge (ESD) )
* Much longer possible lifetime (vacuum tube cathodes are eventually exhausted)
* Complementary devices available (allowing circuits with complementary symmetry: complementary vacuum tubes are not available)
* Ability to control large currents (power transistors are available to control hundreds of amperes: vacuum tubes to control even one ampere are large and costly)
* Non-microphonic (vibration can modulate vacuum tube characteristics)


" Nature abhors a vacuum tube " John R. Pierce, Bell Telephone Laboratories, circa 1948.


Use in audio amplifiers

From mobile phones to televisions, vast numbers of products include audio power amplifiers. The first discrete transistor types struggled to generate a few hundred milliwatts, but power and audio fidelity gradually increased as better transistors became available and amplifier architecture evolved (single-ended transformer coupled to push-pull transformer coupled to push-pull capacitor coupled to push-pull direct coupled).

In all but the most esoteric applications, chip audio power amplifiers have completely ousted discrete types. Initially these chips were temperamental and they too, could only deliver a few hundred milliwatts. But today, for around $10 U.S, you can make a pretty good 50 watt audio power amplifier with a few passive components and an LM3886<26> (http://www.national.com/ds/LM/LM3886.pdf) chip for example.


HiFi amplifiers

Some high fidelity (HiFi) audio amplifiers still use vacuum tubes with their enthusiasts claiming that their sound is superior.

In particular, some argue that the larger number of electrons in a vacuum tube behave with greater statistical accuracy, although this ignores the facts that vacuum tubes generally have a high-impedance control terminal (grid), and that discrete-transistor (as opposed to, say, op-amp) circuits can also be designed to use large currents (to put this in perspective, even 1 milliampere of current carries about 6,240 million million electrons per second).

Others detect a distinctive "warmth" to the sound. The "warmth" is actually distortion caused by the vacuum tubes, but some audiophiles find this pleasing. This is "soft-saturation" and occurs when vacuum tubes are overdriven, causing poorly designed vacuum tube amplifiers to sound better than poorly designed transistor amplifiers. Tube amplifiers are also less prone to slew-rate limiting, which was a problem with early semiconductors and is still observed in low-cost transistor audio amplifiers.

Above speculative opinion gives no correlation between characteristics or measurements and perceived sound quality. See Tubes vs. Transistors - Is There An Audible Difference? (http://milbert.com/tstxt.htm) and Transistors vs. Tubes - Brief Feature Comparison (http://www.milbert.com/TVTFC.bdc).


Guitar amplifiers

Vacuum tubes are also preferred in guitar amplifiers which are designed to be overdriven, because they have a different non-linear transfer characteristic than transistors, and create a different, more pleasing spectrum of harmonic distortion or "fuzz". Digital signal processing (DSP) can be used to achieve similar effects in the digital domain.

It is possible to mix transistors and vacuum tubes in the same circuit.

Simple transistor amplifiers use emitter degeneration to achieve negative feedback, which gives a relatively predictable gain compared to the gain of the transistor itself, which varies widely.


Use in computers
High-power transistors used in a switching power supply. Mounted on an heat sink for enhanced cooling.
Enlarge
High-power transistors used in a switching power supply. Mounted on an aluminium heat sink for enhanced cooling.

The "second generation" of computers through the late 1950s and 1960s featured boards filled with individual transistors, and magnetic cores. Subsequently, transistors, other components (capacitors, but not high-value inductors or transformers), and the necessary wiring were integrated into a single, mass-manufactured component: the integrated circuit. In modern digital electronics, single transistors are very rare, though they remain common in power and analog applications. Recently, inroads have been made in the integration of analog circuits, also, with the advent of "programmable analog" circuits, Systems-on-Chips, and Digital signal processing. DSP is a technique that can (among other things) be used with A/D and D/A converters to simulate analog circuits. Linear integrated circuits got a bad reputation early on because of the difficulty of creating (high-quality) PNP transistors, but are much better today.

Transistors are also used in power regulation and in computer PSUs, especially in switching power supplies.


How transistors work

There are two basic types of transistors, the bipolar junction transistor (BJT) and the field-effect transistor (FET), which work differently. Bipolar transistors are so named because the main conduction channel uses both electrons and holes to carry the main electric current. In BJTs the main current must cross a very thin insulating layer called the Depletion zone, and the width of this layer can be electrically varied at very high rates in order to control the main current. Field-effect transistors (also called unipolar transistors) use only one of the two types of carrier (either electrons or holes, depending on the subtype of the FET). In FETs the main current appears in a narrow conducting channel with an insulating Depletion zone at the side, and the width of this insulating zone can be altered by varying its applied voltage, in order to control the width of the conducting channel and therefore control the main current. See the articles on each type of device for more information.


How semiconductors work

Operationally, transistors and vacuum tubes have similar functions; they both control the flow of current.

In order to understand how a semiconductor operates, consider a glass container filled with pure water. If a pair of conductive probes are immersed in the water and a DC voltage (below the electrolysis point i.e. breakdown point for water) is applied between them, no current would flow because the water has no charge carriers. Thus, pure water is an insulator. Dissolve a pinch of table salt in the water and conduction begins, because mobile carriers (ions) have been released. Increasing the salt concentration increases the conduction, but not very much. A dry lump of salt is non-conductive, because the charge carriers are immobile.

An absolutely pure silicon crystal is also an insulator, but when an impurity e.g. arsenic is added (called doping) in quantities minute enough not to completely disrupt the regularity of the crystal lattice, it donates free electrons and enables conduction. This is because arsenic atoms have five electrons in their outer shells while silicon atoms have only four. Conduction is possible because a mobile carrier of charge has been introduced, in this case creating n-type silicon ("n" for negative. The electron has a negative charge).

Alternatively, silicon can be doped with boron to make p-type silicon which also conducts. Because boron has only three electrons in its outer shell another kind of charge carrier, called a "hole", is formed in the silicon crystal lattice.

In a vacuum tube, on the other hand, the charge carriers (electrons) are emitted by thermionic emission from a cathode heated by a wire filament. Therefore, vacuum tubes cannot generate holes (positive charge carriers).

Note that charge carriers of the same polarity repel one another so that, in the absence of any force, they are distributed evenly throughout the semiconductor material. However, in an unpowered bipolar transistor (or junction diode) the charge carriers tend to migrate towards a P/N junction, being attracted by their opposite charge carriers on the other side of the junction.

Increasing the doping level increases the semiconductor conductivity, providing that the crystal lattice, overall, remains intact. In a bipolar transistor the emitter has a higher doping level than the base. The ratio of emitter/base doping levels is one of the main factors that dictates the junction transistor's current gain.

The level of doping is extremely low: in the order of parts per one hundred million, and this is the key to semiconductor operation. In metals, the carrier population is extremely high; one charge-carrier per atom. In metals, in order to convert a significant volume of the material into an insulator, the charge carriers must be swept out by applying a voltage. In metals this value of voltage is astronomical; more than enough to destroy the metal before it converts to an insulator. But in lightly-doped semiconductors there is only one mobile charge carrier per millions or more atoms. The level of voltage required to sweep so few charge-carriers out of a significant volume of the material is easily reached. In other words, the electricity in metals is incompressible, like a fluid, while in semiconductors behaves as a compressible gas. Doped semiconductors can be rapidly changed into insulators, while metals cannot.

The above explains conduction in a semiconductor by charge carriers, either electrons or holes, but the essence of bipolar transistor action is the way that electrons/holes seemingly make a prohibited leap across the insulating depletion zone in the reverse-biased base/collector junction under control of the base/emitter voltage. Although a transistor may seem like two interconnected diodes, a bipolar transistor cannot be made simply by connecting two discrete junction diodes together. To produce bipolar transistor action they need to be fabricated on the same crystal, and physically sharing a common and extremely thin base region.


Electrical characteristics

Note that in the following example I am using the convention that current flows "from" the positive "to" the negative. In actuality, the moving charge carrier, the electron, is negatively charged and moves in the opposite direction.

When analyzing how current will flow through a circuit, a bipolar transistor can be thought of as effectively three diodes, two of which always conduct, and one of which will conduct depending on the current flowing through the other two. In an NPN transistor, for example, the base will conduct to either the collector or emitter without any resistance other than a fixed forward voltage drop, so long as the voltage at the base is higher than at the emitter or collector. In addition, if current is flowing through the base-emitter junction, a much larger current will be allowed to flow from the collector to the emitter. The multiple that the allowed emitter-collector current is larger than the base-emitter current is called gain or hFE. An hFE value of 100 is typical for small bipolar transistors.

In a typical configuration, a very small signal current flows through the base-emitter junction to control the emitter-collector current. However, bipolar transistors are approximately symmetrical (sans doping differences), and you can use a base-collector current to control the emitter-collector current. Generally the gain in this mode is much smaller (i.e., 2 instead of 100), and it is not a value that is controlled by manufacturers so it can vary wildly.


Light sensitivity

Bipolar transistors can be turned on with light as well as electricity. Devices designed for this purpose are called phototransistors, but these can be standard transistors in a transparent package.


History

All transistors rely on the ability of certain materials, known as semiconductors, to change their conduction under the control of an electric field. In bipolar transistors, the semiconductor is formed into structures called p-n junctions that allow electricity to flow in only one direction through them – that is, they are a conductor when voltage is applied in one direction, and an insulator when it is applied in the other direction.


1900s

Semiconductors had been used in the electronics field for some time before the invention of the transistor. Around the turn of the 20th century they were quite common as detectors in radios, used in a device called a "cat's whisker". These detectors were somewhat troublesome, however, requiring the operator to move a small tungsten filament (the whisker) around the surface of a crystal until it suddenly started working. Then, over a period of a few hours or days, the crystal would slowly stop working and the process would have to be repeated. At the time their operation was completely mysterious. After the introduction of the more reliable and amplified vacuum tube based radios, the cat's whisker systems quickly disappeared. The "cat's whisker" is a primitive example of a special type of diode still popular today, called a Schottky diode.


World War II

In WWII, radar research quickly pushed the frequencies of the radio receivers inside them into the area where traditional tube based radio receivers no longer worked well. On a whim, Russell Ohl of Bell Laboratories decided to try a cat's whisker. After hunting one down at a used radio store in Manhattan, he found that it worked much better than tube-based systems.

Ohl investigated why the cat's whisker functioned so well. He spent most of 1939 trying to grow more pure versions of the crystals. He soon found that with higher quality crystals the "oddness" went away, but so did their ability to operate as a radio detector. One day he found one of his purest crystals nevertheless worked well, and interestingly, it had a clearly visible crack near the middle. However as he moved about the room trying to test it, the detector would mysteriously work, and then stop again. After some study he found that the behaviour was controlled by the light in the room – more light, more conductance. He invited several other people to see this crystal, and Brattain immediately realized there was some sort of junction at the crack.

Further research cleared up the remaining mystery. The crystal had cracked because either side contained very slightly different amounts of the impurities Ohl could not remove – about 0.2%. One side of the crystal had impurities that added extra electrons (the carriers of electrical current) and made it a conductor. The other had impurities that wanted to bind to these electrons, making it an insulator. When the two were placed side by side the electrons could be pushed out of the side with extra electrons (soon to be known as the emitter) and replaced by new ones being provided (say from a battery) where they would flow into the insulating portion and be collected by the filament (the collector). However, when the voltage was reversed the electrons being pushed into the collector would quickly fill up the "holes", and conduction would stop almost instantly. This junction of the two crystals (or parts of one crystal) created a solid-state diode, and the concept soon became known as semiconduction. 'Anode' and 'Cathode' are the terms used to denote the two terminals of a diode. The mechanism of action when the diode is off has to do with the separation of charge carriers around the junction. This is called a 'depletion region.'


Development

Armed with the knowledge of how these new diodes worked, a crash effort started to learn how to build them on demand. Teams at Purdue University, Bell Labs, MIT, and the University of Chicago all joined forces to build better crystals. Within a year germanium production had been perfected to the point where military-grade diodes were being used in most radar sets.

The key to the development of the transistor was the further understanding of the process of the electron mobility in a semiconductor. It was realized that if there was some way to control the flow of the electrons from the emitter to the collector, one could build an amplifier. For instance, if you placed contacts on either side of a single type of crystal the current would not flow through it. However if a third contact could then "inject" electrons or holes into the material, the current would flow.

Actually doing this appeared to be very difficult. If the crystal were of any reasonable size, the amount of electrons (or holes) supplied would have to be very large — making it less than useful as an amplifier because it would require a large current to start with. That said, the whole idea of the crystal diode was that the crystal itself could provide the electrons over a very small distance. The key appeared to be to place the input and output contacts very close together on the surface of the crystal.

Brattain started working on building such a device, and tantalizing hints of amplification continued to appear as the team worked on the problem. One day the system would work and the next it wouldn't. In one instance a non-working system started working when placed in water. The two eventually developed a new branch of quantum mechanics known as surface physics to account for the behaviour.

Essentially, the electrons in any one piece of the crystal would migrate about due to nearby charges. Electrons in the emitters, or the "holes" in the collectors, would cluster at the surface of the crystal where they could find their opposite charge "floating around" in the air (or water). Yet they could be pushed away from the surface from any other location with the application of a small amount of charge. So instead of needing a large supply of electrons, a very small number in the right place would do the trick.

Their understanding solved the problem of needing a very small control area to some degree. Instead of needing two separate semiconductors connected by a common, but tiny, region, a single larger surface would serve. The emitter and collector would both be placed very close together on one side, with the control lead on the other. When current was applied to the control lead, the electrons or holes would be pushed out, right across the entire block of semiconductor, and collect on the far surface. As long as the emitter and collector were very close together, this should allow enough electrons or holes between them to allow conduction to start.


First transistor

They made many attempts to build such a system with various tools, but generally failed. Setups where the contacts were close enough were invariably as fragile as the original cat's whisker detectors had been, and would work briefly, if at all.

Eventually they had a practical breakthrough. A piece of gold foil was glued to the edge of a plastic wedge, and then the foil was sliced with a razor at the tip of the triangle. The result was two very closely spaced contacts of gold. When the plastic was pushed down onto the surface of a crystal and voltage applied to the other side (on the base of the crystal), current started to flow from one contact to the other as the base voltage pushed the electrons away from the base towards the other side near the contacts. The point-contact transistor had been invented, a primitive variation of the BJT.

While the device was constructed a week earlier, Brattain's notes describe the first demonstration to higher-ups at Bell Labs on the afternoon of December 23, 1947, often given as the birthdate of the transistor. The PNP point-contact germanium transistor operated as a speech amplifier with a power gain of 18 in that trial.


Problems with fragility and impurities

Shockley was upset about the device being credited to Brattain and Bardeen, who he felt had built it "behind his back" to take the glory. Matters became worse when Bell Labs lawyers found that some of Shockley's own writings on the transistor were close enough to those of an earlier patent that they thought it best that his name be left off the patent application.

Shockley was incensed, and decided to demonstrate who was the brains of the operation. Only a few months later he invented an entirely new type of transistor one day while sitting in his hotel room waiting to give a speech. This new form, the layer transistor, was considerably more robust than the fragile point-contact system, and would go on to be used for the vast majority of all transistors into the 1960s.

With the fragility problems solved, a remaining problem was purity. Making germanium of the required purity was proving to be a serious problem, and limited the number of transistors that actually worked from a given batch of material. One then-small company, Texas Instruments, decided that the solution to this problem was to use silicon rather than germanium, which should be easier to work with. They were right, and germanium disappeared from most transistors by the late 1960s.

Now everything was in place, and within a few years, transistor-based products, most notably radios, were appearing on the market. A major improvement in yield came when a chemist advised the companies fabricating semiconductors to use distilled water rather than tap water: calcium ions were the cause of the problem. 'Zone melting', also known as 'zone refining', a technique using a moving band of molten material through the crystal, makes this whole endeavour possible.


Early consumer and hobbyist applications

Contrary to popular belief, the portable radio was not the first 'mainstream' transistor application. Even in the 1940s, consumer radios were rather sophisticated; with several vacuum tubes they used Armstrong's brilliantly ingenious superheterodyne architecture. To meet the public's expectations, it would have been necessary for transistor radios to use similar circuitry but early transistors could not operate as amplifiers and oscillators at radio frequencies, even the relatively low 540 to 1700 "kilocycle" AM broadcast band. Also, miniature passive components, such as intermediate frequency transformers and multigang tuning capacitors, were not readily available.

Instead, the first major consumer application was the hearing aid, which only required audio amplification, and retailed in a market where miniaturization was important but low cost not essential. Raytheon, who had also developed ruggedized, minature vacuum tubes for the military, introduced the first transistorized hearing aid.

Texas Instruments' Regency TR-1 <27> (http://people.msoe.edu/~reyer/regency/), the first transistor radio for the general public, wasn't marketed until 1954. But transistor radio sales only really took-off in 1958 with the launch of Sony's model TR-55.

Costing $12 U.S, the PNP CK722 <28> (http://www.ck722museum.com/) hit the market in early 1953. It was practically the only transistor available to hobbyists for almost a decade and innumerable homebrew projects were built using it. The retail versions had failed quality control (QC) and were not suitable for Raytheon's new hearing aid. They had low current gain, high leakage current, especially at elevated temperature, and the characteristics varied between individual parts. They were also a bit fragile and easily "blown up". This made designing practical circuits with the CK722 challenging. In spite of these shortcomings, many hobbyists of the fifties still have a warm place in their hearts for this early germanium transistor.


Miniaturization

With the introduction of transistors, electronic equipment shrank. Another leap in miniaturisation came when complete circuits were integrated on to tiny silicon chips.

The invention of metal oxide silicon (MOS) transistors by the Radio Corporation of America (RCA) in 1960, led to the development of PMOS and NMOS chips that integrated more functions, used less power and were cheaper, but were slower than BJT types. They followed this in 1967 by producing complementary metal oxide silicon CMOS chips that were faster than the previous MOS families and used even less power. With their high level of integration, low cost and minuscule power consumption MOS chips spawned a new generation of battery powered products such as pocket calculators and digital watches.

Advances in packaging have also shrunk components: currently the Ball Grid Array (BGA) package is the most compact. This was preceded by the standard surface mount device (SMD) packages for chips, transistors, diodes, transformers, inductors, capacitors and. resistors.

Compared to the massive expenditure of launching items into space on-board liquid-fuelled rockets, the individual electronic component costs were insignificant. More important was the advantages of reliability and small size. This is why the National Aeronautics and Space Administration (NASA) could justify paying the equivalent of $4,000 U.S. in today's values, for an early quad two-input NAND gate. Now, an equivalent chip, but with vastly improved characteristics, would cost a few cents U.S. while the marginal cost of integrating an additional nand gate into a very large scale integration (VLSI) chip would be essentially zero.
Printer Friendly | Permalink |  | Top
 
Floogeldy Donating Member (1000+ posts) Send PM | Profile | Ignore Mon Jun-27-05 11:33 PM
Response to Reply #28
34. That's good stuff.
Thanks!

B-)
Printer Friendly | Permalink |  | Top
 
NinetySix Donating Member (1000+ posts) Send PM | Profile | Ignore Sun Jun-26-05 11:17 PM
Response to Original message
24. Reverse-engineering is a crock of shit.
In order to be able to reverse-engineer ANYTHING, the engineer must be on a roughly equal technological level with the designer. The principles of the technology must either be known already, or able to be extrapolated from other principles with which the engineer is already familiar. This is how the Soviets were able to derive the A-bomb and the H-bomb so quickly from the West from information gathered by their agents (as opposed to kidnapping Western scientists).

Does this assertion seem dubious? Imagine a seventeenth-century Swiss clockmaker. The intricate gears and mechanisms designed by the Swiss during this period were the state-of-the-art at the time, some of the highest technology to date. The designers were extremely intelligent and creative, and had a firm grasp of the physical principles necessary to invent these precision devices.

Now imagine that you were to surreptitiously travel back in time and slip a Discman or a solar calculator into the clockmaker's workshop. What would he make of it? He certainly wouldn't be able to reproduce it, but could he even make heads or tails of the principles involved in its function, not to mention making use of any of them? Perhaps he could reproduce the springy buttons that control the functions, but it is unlikely that he could have any understanding of the electronics at all, given that electricity was at that time considered a metaphysical force and was ill-understood. And that was only 400 years ago. How many years, centuries, millenia advanced are a race who can traverse the stars?

Such reverse engineering of alien technology must therefore be impossible after so short a time as 50 years. As Arthur C. Clarke observed, "Any technology, sufficiently advanced, would be indistinguishable from magic."
Printer Friendly | Permalink |  | Top
 
norml Donating Member (1000+ posts) Send PM | Profile | Ignore Mon Jun-27-05 01:42 AM
Response to Reply #24
25. Seventeenth-century Swiss clockmakers might learn a lot from a Discman.
Battery powered clocks with tiny electric motors might have been something they could've come up with, if given such a thing to study. Neither your example, nor Clark's broad statement is proof of anything.
Printer Friendly | Permalink |  | Top
 
chickenscratching Donating Member (1000+ posts) Send PM | Profile | Ignore Mon Jun-27-05 12:22 PM
Response to Reply #24
29. What does 'extrapolated' mean?
This is what Dictionary.com told me:

2 entries found for extrapolated.
ex·trap·o·late Audio pronunciation of "extrapolated" ( P ) Pronunciation Key (k-strp-lt)
v. ex·trap·o·lat·ed, ex·trap·o·lat·ing, ex·trap·o·lates
v. tr.

1. To infer or estimate by extending or projecting known information.
2. Mathematics. To estimate (a value of a variable outside a known range) from values within a known range by assuming that the estimated value follows logically from the known values.


v. intr.

To engage in the process of extrapolating.


ex·trapo·lation n.
ex·trapo·lative adj.
ex·trapo·lator n.


Source: The American Heritage® Dictionary of the English Language, Fourth Edition
Copyright © 2000 by Houghton Mifflin Company.
Published by Houghton Mifflin Company. All rights reserved.

extrapolated

adj : that are estimated; "the extrapolated values"

Source: WordNet ® 2.0, © 2003 Princeton University

Perform a new search, or try your search for "extrapolated" at:

* Amazon.com - Shop for books, music and more
* HighBeam Research - 32 million documents from leading publications
* Merriam-Webster - Search for definitions
* Reference.com - Web Search powered by Google
* Thesaurus.com - Search for synonyms and antonyms


ADVERTISEMENT

Get CleverKeys and look up words from any program - FREE download!
From the makers of Dictionary.com

Copyright © 2005, Lexico Publishing Group, LLC. All rights reserved.
About Dictionary.com | Privacy Policy
Printer Friendly | Permalink |  | Top
 
chickenscratching Donating Member (1000+ posts) Send PM | Profile | Ignore Mon Jun-27-05 12:31 PM
Response to Original message
30. In asking:
'Norml, why did you post intelligent information?'
:shrug:
Printer Friendly | Permalink |  | Top
 
DU AdBot (1000+ posts) Click to send private message to this author Click to view 
this author's profile Click to add 
this author to your buddy list Click to add 
this author to your Ignore list Fri May 03rd 2024, 03:18 AM
Response to Original message
Advertisements [?]
 Top

Home » Discuss » The DU Lounge Donate to DU

Powered by DCForum+ Version 1.1 Copyright 1997-2002 DCScripts.com
Software has been extensively modified by the DU administrators


Important Notices: By participating on this discussion board, visitors agree to abide by the rules outlined on our Rules page. Messages posted on the Democratic Underground Discussion Forums are the opinions of the individuals who post them, and do not necessarily represent the opinions of Democratic Underground, LLC.

Home  |  Discussion Forums  |  Journals |  Store  |  Donate

About DU  |  Contact Us  |  Privacy Policy

Got a message for Democratic Underground? Click here to send us a message.

© 2001 - 2011 Democratic Underground, LLC